OB1 V3.0 LED System for Touring/Drift Car

V3.0 - Standard kit (4-Channel, 4 LED cables)

• 12 LED Connectors; 

 FR1-3 (Front lamp) / BR1-3 (Brake lamp) / L1-2, R1-2 (Left & Right signals) /
 MUF (Muffler lamp) / REV (Reverse lamp)

• 1-4 Channels input;
• Main / Sub Unit design, uses 1 cable to connect each others
• Support virtually all RC systems in market
• High Response 2.4G System, PCM / PPM (FM), AM
• Powered by BEC of RC system, no external power required

However if HIGH / EX-HIGH Power option used, external BEC is required

Standard kit includes:

• Main unit x 1
• Sub Unit x 1
• Main cable x 1
• SET/PAIR Switch cable x 1
• Front LED cable x 1 (5mm WHITE LED x 2)
• Rear LED cable x 1 (5mm RED LED x 2)
• Left / Right LED cable x 2 (3mm YELLOW LED x 2)
• User Manual (English / Traditional Chinese) x 1

Functions:

CH1 - Steering

• Left / Right winker lamp

CH2 - Throttle

•  2-level brightness brake lamp
• Auto hazard lamp
• Reverse lamp
• Muffler lamp
• Toggle function (Hold full brake for 3 sec. to change LED status, total 4 steps !)

CH3 - ON/ OFF

• Flash mode Toggle or

• Front lamps On/ Off

CH4 - ON/ OFF

• Manual hazard

• Front / Muffler / REV lamps On/ Off

Special functions:

• Low Voltage Detection (LVD), Buzzer uses as audible alarm
• Flash mode (All LED), Press SET switch anytime (or use CH3) after power on to change total 7 flashing styles

• BR3, FR2, 3 connectors have 4 Power Options (Low/ Mid/ High / Extra High)

1 connector Max. can drive 16 LED (20mA) type

V3.0 Specification:

• Input Voltage: 5-6VDC (Powered by BEC), absolute Max. 9V
• Low Voltage Detection battery type: 1-6S LiPo / LiFePo (User define Max. 25.2V)
• Support RC Modulation: High Response 2.4G system / PCM / PPM (FM) / AM
• Dimension (Main unit): 44mm (L), 38mm (W), 10mm (H)
• Dimension (Sub unit): 22mm (L), 22mm (W), 10mm (H)

Weight: Main unit 12g / Sub unit 10g (Not includes cables)