V3.1 - Standard kit (4-Channel, 4 LED cables)
FR1-2 (Front lamp) / BR1 (Brake lamp) / L1-2, R1-2 (Left & Right signals) /
AUX1-2 (AUX lamp) / FOG (Fog lamp) / ROF (Roof lamp) / REV (Reverse lamp)
- 1-4 Channels input;
- Main / Sub Unit design, uses 1 cable to connect each others
- Support virtually all RC systems in market
- High Response 2.4G System, PCM / PPM (FM), AM
- Powered by BEC of RC system, no external power required
However if HIGH / EX-HIGH Power option used, external BEC is required
Standard kit includes:
- Main unit x 1
- Sub Unit x 1
- Main cable x 1
- SET/Pair Switch cable x 1
- Extend LED cable x 1
- Front LED cable x 1 (5mm WHITE LED x 2)
- Rear LED cable x 1 (5mm RED LED x 2)
- Left / Right LED cable x 2 (3mm YELLOW LED x 4)
- Left / Right LED cable x 2 (5mm YELLOW LED x 2)
- User Manual (English / Traditional Chinese) x 1
Functions:
CH1 - Steering
CH2 - Throttle
- 2-level brightness brake lamp
- Auto hazard lamp
- Reverse lamp
CH3 - ON/ OFF
- Manual hazard lamp
- Flash mode Toggle
- Front lamps On/ Off
CH4 - ON/ OFF
- Toggle function (Hold for 3 sec. to change LED status, total 4 Toggle steps !)
Special functions:
- Reverse beep (Buzzer is required)
- Low Voltage Detection (LVD), Buzzer uses as audible alarm
- Flash mode (All LED), Press SET switch anytime (or use CH3) after power on to change total 7 flashing styles
- FR2, AUX2, ROF connectors have 4 Power Options (Low/ Mid/ High / Extra High)
1 connector Max. can drive 16 LED (20mA) type
V3.1 Specification:
- Input Voltage: 5-6VDC (Powered by BEC), absolute Max. 9V
- Low Voltage Detection battery type: 1-6S LiPo / LiFePo (User define Max. 25.2V)
- Support RC Modulation: High Response 2.4G system / PCM / PPM (FM) / AM
- Dimension (Main unit): 44mm (L), 38mm (W), 10mm (H)
- Dimension (Sub unit): 22mm (L), 22mm (W), 10mm (H)
- Weight: Main unit 12g / Sub unit 10g (Not includes cables)
Please fill in these fields!